Flush Bottam Ball Valves
TWO way ball valve STEM BENT BOTTOM with "STANDARD SEAL"
Use: valve for tank bottom
Drive: ISO 5211 - DIN 3337 flange for actuator
Connections: Flange-Flange, tank side flange fixed and ISO 228
Flow: full
Material: Aisi 316L
Measure: from DN 40 to DN 100
Seals: virgin P.T.F.E.
Operating temperature: -20°C +160°C
Outer finish: Polished
Screws for mounting actuator included
On request:
• MANUAL with LEVER
• Counterflanges for tank
• Outlet side connection CLAMP (DIN 32676), DIN 1185
| Pos. | Denomination | Pcs | Mat. |
| 1 | Body | 1 | AISI 316L |
| 2 | Ball | 1 | AISI 316L |
| 3 | Sleeve | 1 | AISI 316L |
| 4 | Stem | 1 | AISI 316L |
| 5 | Ball seals | 2 | PTFE |
| 6 | Sleeve seal | 1 | PTFE |
| 7 | Stem seal | 1 | PTFE |
| 8 | Stem seal | 1 | PTFE |
| 9 | Stem OR-seal | 1 | FKM |
| 10 | Register ring | 1 | AISI 304L (303) |
| 11 | Locknut | 1 | AISI 303 |
| 12 | Sleeve bolts | 6 | AISI 304L |
| 13 | Lever | 1 | AISI 304L |
| 14 | Handle | 1 | DUROPLAST (PF) |
| 15 | Lever bolts | 1 | AISI 304L |
| 16 | Stop lever bolts | 2 | AISI 304L |
| 17 | Nuts | 2 | AISI 304L |
| 18 | Counterflange | 1 | AISI 316L |
| 19 | Flanges seal | 1 | PTFE |
| 20 | Flanges O-Ring | 1 | EPDM |
TWO way ball valve STEM BENT BOTTOM with "STANDARD SEAL"
Use: valve for tank bottom
Drive: ISO 5211 - DIN 3337 flange for actuator
Connections: Flange-Flange, tank side flange fixed and revolving threaded
flange according to UNI EN 1092-1:2003 on outlet side
Flow: full
Material: Aisi 316L
Measure: from DN 40 to DN 100
Seals: virgin P.T.F.E.
Operating temperature: -20°C +160°C
Outer finish: Polished
Screws for mounting actuator included
On request:
• MANUAL with LEVER
• Counterflanges for tank
• Outlet side connection CLAMP (DIN 32676), DIN 11851
| DN Ball Valve | L | M | I | N | P | Ø R | Ø T | Ø A | B | Ø C | Ø D x n° | Ø E (Flange DN) | S | F | Ø G | Ø H x n° | K | U | V | PN | Kg |
| 40 | 122 | 77 | 36 | 45 | 126 | 84 | 75 | 150 | 16 | 110 | 18 x 4 | 165 | 17 | 20 | 125 | 18 x 4 | 100 | 240 | 178 | 16 | 8,5 |
| 50 | 127 | 82 | 37 | 45 | 132 | 94 | 89 | 165 | 18 | 125 | 18 x 4 | 185 | 17 | 20 | 145 | 18 x 4 | 115 | 240 | 185 | 16 | 11,1 |
| 65 | 149 | 96 | 40 | 53 | 156 | 119 | 110 | 185 | 18 | 145 | 18 x 4 | 200 | 17,5 | 20 | 160 | 18 x 8 | 140 | 270 | 215 | 16 | 15,5 |
| 80 | 166 | 101 | 40 | 65 | 167 | 138 | 120 | 200 | 18 | 160 | 18 x 8 | 220 | 19,5 | 22 | 180 | 18 x 8 | 155 | 300 | 225 | 16 | 19,95 |
| 100 | 186 | 111 | 47 | 75 | 181 | 165 | 140 | 220 | 20 | 180 | 18 x 8 | 250 | 27,5 | 22 | 210 | 18 x 8 | 185 | 325 | 245 | 16 | 28,8 |
| 125 | 245 | 150 | 60,5 | 95 | 205 | 190 | 153 | 250 | 22 | 210 | 18 x 8 | 285 | 26,5 | 24 | 240 | 22 x 8 | 220 | 483 | 286 | 16 | 43,9 |
| ISO | Ø a | b | Ø c x o | ? | d | Ø e | Ø f | SCREWS for ACTUATOR | Nm | ||||||||||||
| DN40 - F 05 | 65 | 12 | 35 x 3 | 14 | 15 | 50 | 7 | M6 x 16 | 25 | ||||||||||||
| DN50 - F 05 | 65 | 12 | 35 x 3 | 14 | 15 | 50 | 7 | M6 x 16 | 30 | ||||||||||||
| DN65 - F 07 | 90 | 12 | 55 x 4 | 17 | 17 | 70 | 9 | M8 x 20 | 45 | ||||||||||||
| DN80 - F 07 | 90 | 12 | 55 x 4 | 17 | 17 | 70 | 9 | M8 x 20 | 70 | ||||||||||||
| DN100 - F 07 | 90 | 12 | 55 x 4 | 17 | 17 | 70 | 9 | M8 x 20 | 80 | ||||||||||||
| DN125 - F 10 | 120 | 12 | 70 x 4 | 22 | 19 | 102 | 11 | M10 x 25 | 130 |
| Pos. | Denomination | Pcs | Mat. |
| 1 | Body | 1 | AISI 316L |
| 2 | Ball | 1 | AISI 316L |
| 3 | Sleeve | 1 | AISI 316L |
| 3a | Sleeve flange | 1 | AISI 316L |
| 4 | Stem | 1 | AISI 316L |
| 5 | Ball seals | 2 | PTFE |
| 6 | Sleeve seal | 1 | PTFE |
| 7 | Stem seal | 1 | PTFE |
| 8 | Stem seal | 1 | PTFE |
| 9 | Stem OR-seal | 1 | FKM |
| 10 | Register ring | 1 | AISI 304L (303) |
| 11 | Locknut | 1 | AISI 303 |
| 12 | Sleeve bolts | 6 | AISI 304L |
| 13 | Lever | 1 | AISI 304L |
| 14 | Handle | 1 | DUROPLAST (PF) |
| 15 | Lever bolts | 1 | AISI 304L |
| 16 | Stop lever bolts | 2 | AISI 304L |
| 17 | Nuts | 2 | AISI 304L |
| 18 | Counterflange | 1 | AISI 316L |
| 19 | Flanges seal | 1 | PTFE |
| 20 | Flanges O-Ring | 1 | EPDM |
